Redmi Note 12 Turbo

Description

Appearance size
Height: 161.11mm
Width: 74.95mm
Thickness: 7.9mm
Weight: 181g
*The above data is the test data of Xiaomi laboratory. The actual results may vary slightly depending on the different measurement methods in the industry.
Fingerprint power button
Volume button
Speaker
Infrared
Top MIC
Type-C
Main MIC
Speaker
SIM card slot
Headphone jack
Mobile platform
Second-generation Snapdragon® 7+ mobile platform
Processing: TSMC 4nm
CPU: Octa-core processor, up to 2.91GHz
GPU: Adreno™ GPU graphics processor
AI: Qualcomm AI Engine
Memory capacity
16GB + 1TB maximum optional
8GB + 256GB
12GB + 256GB
12GB + 512GB
Harry Potter Edition: 12GB + 256GB
LPDDR5 high-speed memory
UFS 3.1 high-speed storage
*The actual available capacity will be reduced and vary due to many factors: Since the operating system occupies part of the memory (RAM), the actual available space is less than the indicated memory capacity; Since the installation of the operating system and pre-installed programs occupy part of the flash memory (ROM), the actual available storage space is less than the indicated flash memory capacity.

Screen display
Ultra-thin four-narrow edge OLED flexible straight screen
Size: 6.67 inches
Resolution: 2400 x 1080
Global excitation brightness: 1000nit*
Contrast ratio: 5,000,000:1
Dimming level: 16000 levels
Display frame rate: 30 / 60 / 90 / 120Hz
Touch sampling rate: global 240Hz
*Global excitation brightness refers to the maximum brightness of the screen excited in a strong light environment
1920Hz high-frequency PWM dimming | 12bit color depth | DCI-P3 color gamut | Sunlight screen | Eye protection mode | SGS low blue light certification | Adaptive HDR |
Dolby Vision | HDR10+ | Frame enjoyment ultra-high definition certification
Battery life and charging
5000mAh battery
Single battery cell, middle-mounted ear (MMT)
67W wired fast charging
The phone supports QC4 / QC3.0 / QC2.0 / PD3.0 / PD2.0 fast charging protocol / MI FC 2.0 fast charging
USB Type-C double-sided charging interface
Standard 67W charger

Imaging system
Rear 64 million pixel quick shot anti-shake camera
64 million pixel ultra-clear main camera: OIS optical image stabilization | Support 4in1 1.4μm
Fusion pixel | 1/2” large size light sensor
8 million pixel ultra-wide angle lens: 120° FOV
2 million pixel macro lens
Xiaomi Image Brain 2.0
Magic sky change｜Video super anti-shake｜Privacy protection watermark｜Time-lapse macro｜Time-lapse photography｜Peak focus｜AI watermark｜Tilt-shift effect｜
VLOG｜Long exposure｜4K video｜Dynamic photo｜Gesture photo｜Voice subtitles｜Voice-controlled photo｜Timed continuous shooting｜Exposure feedback｜ID card copy mode
4K video shooting: 30fps
1080p Video shooting: 30 / 60fps
1080p slow motion video shooting: 120fps / 240fps
720p video shooting: 30fps
720p slow motion video shooting: 120fps / 240fps
Front 16 million pixel HD portrait camera
Screen fill light｜Volume key countdown shooting｜Super night scene｜Ultra-wide panorama｜Voice-controlled shooting｜Timed continuous shooting｜Time-lapse photography｜Voice subtitles｜
Dynamic photo (livephoto)｜AI watermark｜Portrait beauty｜Face recognition｜Video beauty｜Kaleidoscope｜Video label
1080p video shooting: 30/60fps
720p video shooting: 30fps

Network band
Dual SIM 5G | All Netcom 8.0
Supports dual Nano-SIM card slots, 5G network is available regardless of operator ①
Supports China Mobile/China Unicom/China Telecom/Radio and Television ② 5G/4G/3G/2G ③
Supports dual-card dual pass, dual-card HD voice ④
Note ①: Whether 5G is supported depends on the local operator network; when using two telecom cards, the non-Internet card needs to activate the HD voice service. If it is not activated or the local network does not support HD voice, the service cannot be used;
Note ②: Radio and television do not support 2G and 3G networks; Radio and television do not support MMS services;
Note ③: TD-SCDMA format (Mobile 3G) is not supported; CDMA 2000 EVDO format (Telecom 3G) is not supported;
Note ④: Dual-card dual pass only supports some frequency band combinations of 5G+5G in SA mode, and supports HD voice services of Mobile/Unicom/Telecom/Radio and Television. The actual usage depends on the operator’s local network and service deployment.
Supported frequency bands
5G: n1/n3/n5/n8/n28a/n38/n41/n77/n78
Note: The actual network and frequency band usage depends on the local operator deployment;
n28a (Tx: 703-733MHz, Rx: 758-788MHz).
4G: FDD-LTE: B1/B3/B5/B8/B19
TDD-LTE: B34/B38/B39/B40/B41/B42
Note: LTE B41 (2496-2690 194MHz);
3G: WCDMA: B1/B5/B6/B8/B19
2G: GSM: B3/B5/B8; CDMA 1X: BC0
Supports 4×4 MIMO antenna technology “HPUE” HORxD
Data connection
WLAN protocol: Wi-Fi 6 Enhanced, Wi-Fi 5, Wi-Fi 4 and 802.11a/b/g
WLAN frequency: 2.4G Wi-Fi | 5G Wi-Fi
Supports 2×2 MIMO, 8×8 Sounding for MU-MIMO, Wi-Fi Direct, Miracast, 2.4G, 5G dual-channel concurrent
Bluetooth Bluetooth 5.3
Support: AAC / LDAC / LHDC 5.0

Navigation positioning
Beidou: B1i+B1c｜GPS: L1｜Galileo: E1
GLONASS: G1｜QZSS: L1｜A-GPS｜
Data network positioning｜Wi-Fi network positioning｜Sensor assisted positioning

Video and audio
Stereo dual speakers
MP3, FLAC, APE, AAC, OGG, WAV, AMR, AWB
Hi-Res Audio certification｜Hi-Res Wireless certification｜Dolby Atmos

MP4, MKV, WEBM, 3GP playback
Support HDR10/10+ video

Sensor
Optical distance sensor | Ambient light sensor | Acceleration sensor | Gyroscope | Electronic compass | Infrared remote control | X-axis linear motor

NFC function
Open NFC in the wallet app After the relevant services are turned on, you can use functions such as transportation cards, Mi Pay, door cards, and car keys by double-clicking the power button.

Transportation card: supports 300+ cities, and supports 40+ bus cards to be migrated from the old phone to the new phone for free. (The cities supported by transportation cards vary due to technical conditions, cities, etc., and are subject to actual conditions; the available scope of card terminals and travel discounts are subject to the release of local governments and operating companies.)

Mi Pay: supports online App payment, offline card swiping, QR code payment, and UnionPay label touch payment. QR code payment supports UnionPay standard QR code
main scan and scan payment, Alipay, WeChat and other standard payment QR code main scan payment.

Door card: physical door card, smart door lock, community door card, custom blank card. (Only door cards with a frequency band of 13.56MHz can be simulated. Even if the simulation of bank cards and door cards with functions such as stored value consumption and public transportation consumption is successful, these cards do not have bank and public transportation functions)

Car keys: support mobile phone NFC unlocking, engine start and other functions.

The specific number of supported cities, city names, banks, number of cards, car key cooperation models, etc. are subject to actual conditions.
For further information, please refer to (https://www.mipay.com)

Operating system
MIUI 14

Packing list
Mobile phone host｜Power adapter｜USB Type-C data cable｜Mobile phone protective case｜Film (already covered on the screen)｜
Pin｜Instruction manual (including three-guarantee certificate)